安科瑞低压柜触头无线测温产品
低压柜触头无线测温产品ATE 3~35kV系列无线测温传感器根据 《NB/T 42086-2016无线测温装置技术要求》 开发,可用于户内开关柜,包括中置柜、手车柜、固定柜、环网柜等多种开关柜;也可用于0.4kV低压柜,包括固定柜,抽屉柜等。无线测温传感器可安装于柜内任何发热点上,利用无线数据传输技术实时发送监测数据,再通过接收装置将温度数据传输到显示装置或者远程监控系统。
型号说明
技术指标
1.4产品安装
无线温度传感器共有多种型号,分别对应磁吸固定、螺栓固定、表带固定、合金片固定等安装方式
如果安装ATE100 ATE200P ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P ASD/ARTM-Pn “编码:1B的标签组号一致,安装位置依照标签文字安装,“编码:"为安装第一个B相,以此类推。ATE200 ATE400,其组号应与显示装置1A "为安装第一个A If the sensor is ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P, the number behind “相,组号(Group码():" should be the same asASD/ARTM-Pn, the sequence of installation is base on the label, “编Code on.):1A" is first one on the phaseA, “编码(Code):1B" is first one on the phase B,and so注意:出厂时包装箱内无线温度传感器与显示装置已配对,不可以与其他显示装置或无线温度传感器混用,无线温度传感器按照标签安装。Notice: wireless temperature sensors and display device in the package have been matched before delivery. Do not use them with other display device or other wireless temperatur
together. Please installing them with label on the sensor. 1.4.2.2 ATE传感器搭配ATC600-C 1.4.2.2 ATE sensor withATC600-C
如图所示,如果安装应与ATC600-C ATE100 ATE200P ATE200 ATE300P ATE400 ATE100M/ATE100/ATE200/ATE400/ATE100P/ATE200P/ATE300P,其组号的组号一致,安装位置依照标签文字安装,“编码:001 "建议安装在第一个柜子的第一个测温点,再依次按照测温点顺序安装。According to the above pictures, If the sensor is ATE100M/100/200/400/100P/200P/300P, the group number of ATE must be same as the group number of ATC600-C and the installation order is base on the label. The code of each sensor is used to distingguish each sensor from same group. “编码(code): 001 " is recommended to be installed on the first temperature measuring point of the first cabinet, and then installed other sensors in this order. 1.4.2.3 ATE300M传感器搭配ATC600-M 1.4.2.3 ATE300M sensor withATC600-M收发器coordinato